Services

Asphalt Repair & Patching

This process consists of filling the affected areas with hot or cold asphalt mix, depending on the season and/or site location.

Patching is a common asphalt repair on areas of pavement with potholes. Potholes occur when water seeps into pavement through unsealed or improperly sealed cracks. When the water freezes, it expands and enlarges the crack. When the ice under the pavement melts, a void is left. Surrounding pavement falls into the void and forms a pothole.

Asphalt Removal & Replacement

This process consists of several important steps to ensure that the repair is performed properly.

As asphalt pavement progresses through its performance lifecycle, its appearance diminishes over time. Fine hairline cracks spread and deepen within the asphalt. Without ongoing maintenance, water may enter through cracks and holes may form, undermining the substrate. In this case, the most effective form of repair is to remove and replace the deteriorated area.

Line Painting

A parking lot is one of the first things noticed by customers, clients, and visitors entering a facility. The color contrast of a newly striped lot is attractive and is a good indication that the property owner emphasizes maintenance.

A well-marked parking lot directs people safely around the parking area. Crosswalks, stop bars, loading-zone markings, and properly marked pickup areas, such as for customers or boarding vehicles, inform pedestrians where they should walk, when to give right-of-way to traffic, and what areas to avoid.

Asphalt Maintenance

As soon as freshly laid hot asphalt pavement mix begins to cool, the aging process begins.

When oxygen in the air and water combine with the asphaltic binder of the pavement, a chemical change takes place. At first, this process is necessary for the pavement to become hard and firm. Later, if this process is not arrested, a complete deterioration of the asphaltic binder will take place and reduce the pavement to a layer of loose stone. Enemies of a parking lot include: gas, oil, sun oxidation, salt, water penetration, and hot or cold weather.

Asphalt Resurfacing

This process consists of several steps including preparing and cleaning the area prior to performing work, leveling asphalt of low areas, grinding of all transitions, adjusting of all drainage structures, and many other steps unique to each site.

Asphalt Resurfacing In more severe cases of asphalt failure, a long-term and cost-effective solution is to resurface the asphalt pavement (also referred to as overlay). If you notice grade depressions (standing water on the pavement) and/or large sections of alligatored areas (interconnecting cracks forming a series of blocks resembling an alligator’s skin), it is a good idea to have your pavement resurfaced.

New Paves

Start from Scratch. We can help level, and pave your new driveway, sidewalk or any other area.